Soils & Materials Laboratory (M) Sdn Bhd(75023-M)

No. 1, Jalan 7/155,
Bukit OUG Industrial Park,
Kuala Lumpur, Wilayah Persekutuan 58200
Malaysia
Categories


Product & Services
 
SCOPE OF SERVICE

The services provided by the firm include routine testings and assessment for specification compliance, problem solving, field investigations and evaluation trials. The Company also undertakes other related services depending upon the actual requirements specified by the clients.
The firm offers the following services to the civil engineering construction industry as summarized in the following paragraphs. These services provided to clients are treated confidentially.

CEMENT & CONCRETE TESTING

CEMENT

Chemical analysis
Fineness and specific gravity
Cement strength and soundness test
Standard consistency and setting time by vicat method

CONCRETE

Concrete strength tests - compressive, indirect tensile and flexural strength
Concrete consistency test - slump, compacting factor
Concrete setting time and air content test
Modulus of elasticity in compression
Concrete unit weight and yield test
Water permeability test on concrete and mortar
Initial surface absorption test, water absorption test and sorptivity test
Analysis of fresh and harden concerte, to determine constituent proportions
Concrete mix design and trial mix - normal concrete, light weight concrete, high strength concrete etc.

LABORATORY TESTING & EVALUATION

AGGREGATE TESTING

Grading and shape tests
Unit weight, relative density and water absorption
Aggregate strength and soundness tests
Evaluation of deleterious materials in aggregate by physical, chemical and petrographic methods
Petrological studies
Resistance of aggregate to stripping from bitumen

SOIL TESTING

Soil classification and moisture content
Particle size distribution by sieve and hydrometer method
Soil chemical test
Compaction test
One dimensional consolidation test
Compression shear test
California Bearing Ratio test
Permeability test

BITUMEN & BITUMINOUS CONCRETE

(ASPHALTIC CONCRETE)
BITUMEN

Specific gravity
Softening point
Penetration test

BITUMINOUS CONCRETE (ASPHALTIC CONCRETE)

Bulk density and voids content
Bitumen content and aggregate grading
Stability, flow, density and voids determination - by Marshall Method
Marshall mix design and trial mix
Parement coring and tickness measurement

OTHER CONSTRUCTION MATERIALS

Steel reinforcement - Tensile strenghth and bend tests
Water - ph value, chemical analysis for suitability of water for use in concrete
Concrete admixture - specific gravity, pH value, chloride content and solid content
Concrete admixture testing for specification compliance and evaluation test
Sieve analysis, compaction and C.B.R test for crushed aggregate road base
Strength test and specification compliance test for bricks, hollow blocks

FIELD INVESTIGATIONS

Field sampling of materials for laboratory testing
Concrete and bituminous concrete coring
In - situ density test
California Bearing Ratio test
Plate Bearing test
Non - destructive concrete testing
Investigation of concrete failure
Assessment of concrete strength in exitising structures
Problem solving in the use of concrete
Load test on existing building

SOIL INVESTIGATION AND FOUNDATION ENGINEERING

Soil sampling
Auger boring
Mackintosh probe
In-place vane shear test
Deep soundings
Dynamic cone penetration
Percussion and rotary drilling
Instrumentation

CONSTRUCTION SUPERVISION AND QUALITY CONTROL

The firm provides testing equipment and experienced personnel to station at job site on project basis for supervision and quality control of construction materials for highway, ports, airports, housing schemes, high - risse buildings, dams and drainage system projects.


OTHER RELATED SERVICES

Our services are not limited to the above mentioned. Other related services provided by the firm include technical advisory service on concrete and bituminous concrete, staff training, structural and foundation repairs, grouting and etc.


  Image
Soils & Materials Laboratory (M) Sdn Bhd


  Video